Service Agreements
We have 3 Service Agreement Plans to choose from, each designed to keep your home comfortable all year long. Please review the plans below and call us for additional questions or details.
Heat Pump Advantage
$269/year
For customers with Heat Pumps
Here’s our comprehensive heating and cooling service plan that has been designed to keep your home comfortable all year long.
Features of the Heat Pump Advantage Plan are:
- Priority Service
- Annual Tune Up
Lubrication, adjustment and cleaning. Our trained technicians diligently inspect and check:
- Operating Temperatures and pressures for proper refrigerant level.
- Clean/check condenser and evaporator coils
- Check drainage in condensate pan, and clean
- Check safety controls & compressor
- Check electric connections, contactors & check compressor
- Free Service Calls
During normal business hours 8am-4pm. Regular overtime rates apply after 4prn, on weekends and holidays. 1 Free cleaning and tune-up visit per year for Heat Pumps during the normal summer working hours (M-F 8am-4pm, April 1 – Sept, 30)
- Parts Protection
- Contactors, Fan Relay
- Start Relay, Capacitors
- Thermostat (non-programmable)
15% Discount On the following parts (Regular labor service rates apply to repair and installation of the following):
- Circuit boards
- High/Low Pressure switches (non-sweat only)
- Blower motor and components
- Condenser Fan motor and components
- Fan Blade, Blower Wheel
- Refrigerant (½ lb, allowance)
- Any special order parts not listed above
Save $80.00 Off Second Complete System
(If second system is at the same address). Residential systems only.
Any tune-up done after Oct. 1 will not be a part of the service agreement and there will be a $90.00 charge for the tune-up.
Premier Gas & Oil Heat Plan
$179/year
Gas Residential Heat Systems
Here’s our heating service plan designed for your gas fired heating systems.
Features of the Premier Gas Heat Plan are:
- Priority Service
- Annual Tune UP – Lubrication, adjustment and cleaning
Oil Residential Heat Systems
Here’s our heating service plan designed for your oil fired heating systems. Our Premier Heat Plan is your assurance of carefree, continuous comfort for a full year.
Features of the Premier Oil Heat Plan are:
- Priority Service
- Annual Tune Up – Lubrication, adjustment, cleaning and efficiency test
Free Service Calls
During normal business hours 8am-4pm. Regular overtime rates apply after 4pm, on weekends and holidays, 1 Free cleaning and tune-up visit per year for furnaces and boilers during the normal summer working hours (M-F 8am-4pm, April 1- Sept, 30). However you must arrange an appointment within 4 weeks of receiving the reminder postcard. if not we may not be able to respond in a timely manner, Any tune-up done after Oct. 1 will not be a part of the service agreement and there will be a $90.00 charge for the tune-up.
Parts Protection
Free replacement or repair of defective or worn burner parts and controls as specified below and limited to those items.
- Burner Motors, Oil Pump, Transformer
- Thermostat (non-programmable)
- Electrodes, Stack Relay
- Oil Filter (one time only),
- Nozzle, Fan & Limit controls
- Flu pipe, Hot surface igniter, Thermocoupler
Free replacement or repair of defective or worn burner parts and controls as specified below and limited to those items.
15% Discount On the plumbing components and blower components as listed below (Regular labor service rate will apply to repair- and installation of the following):
- Aguastat
- Circulators, power heads, zone valves
- Feed vales
- Low water cut off
- Circuit Boards
- Combustion (induced draft) motor
- Mechanical Power Venters
- Variable speed motors
- Flow control valves, regulators, bearing assemblies, relief valves
- Piping, circulator motors, pressure regulators
- Gas valves, Blower motors, Shafts, Bearings complete, Blower Assemblies
- Any special order parts not listed above
- Circulators, Bearing Assembly, Power heads, Reducing Valves, Zone Valves
- Any special order parts not listed above
**Must purchase #2 fuel oil from LSC
Save $80.00 Off Second Complete System
(If second system is at the same address – Residential systems only)
Stay Cool A/C Plan
$149/year
If partnered with one of the heat plans only $120/year
For customers just wanting A/C protection — here’s our new Stay Cool A/C Plan designed to keep you feeling great during these HOT summer months!
Features of the Stay Cool A/C Plan are:
Free Service Calls
During normal business hours 8am-4pm. Regular overtime rates apply after 4pm, on weekends and holidays, 1 Free cleaning and tune-up visit per year for furnaces and boilers during the normal summer working hours (M-F 8am-4pm, April 1- Sept, 30). However you must arrange an appointment within 4 weeks of receiving the reminder postcard. if not we may not be able to respond in a timely manner, Any tune-up done after Oct. 1 will not be a part of the service agreement and there will be a $90.00 charge for the tune-up.
A/C Products & Services:
Our trained technicians diligently inspect and check:
- Clean/check condenser and evaporator coils
- Check drainage in condensate pan, and clean
- Check safety controls & compressor
- Check electrical connections and contactors
- Check compressor
Parts Protection:
Clean, lubricate and adjust and/or replace any needed parts as specified and limited to parts listed below:
- All parts covered under our Silver Heat Plan, plus:
- Blower motors (1/3 hp or less, not including variable speed motors),Condenser Fan Motor, Contactors, Fan Relay, High/Low Pressure Switches, Refrigerant (2lb allowance), Fan Blade, Blower wheel, Start Relay, Fan Belts – Capacitors, Thermostat (non-programmable)
15% Discount: For any special ordered part not listed above
For customers with A/C Units
Here’s our Stay Cool NC Plan designed to keep you feeling great during the HOT summer months!
Features of the Stay Cool Plan are:
Lubrication, adjustment and cleaning. Our trained technicians diligently inspect and check:
- Operating Temperatures and pressures for proper refrigerant level.
- Clean/check condenser and evaporator coils
- Check drainage in condensate pan, and clean
- Check safety controls & compressor
- Check electric connections, contactors & check compressor
Free Service Calls
During normal business hours 8am-4pm. Regular overtime rates apply after 4pm, on weekends and holidays. 1 Free cleaning and tune-up visit per year for NC during the normal summer working hours (M-F 8am-4pm, April 1 Sept. 30)
Free replacement or repair of defective controls as specified below and limited to those items.
- Contactors, Fan Relay
- Thermostat (non-programmable)
15% Discount On the following parts (Regular labor service rates apply to repair and installation of the following):
- Circuit Boards
- High/Low Pressure switches (non-sweat only)
- Blower motor and components
- Condenser Fan motor and components
- Fan Blade, Blower Wheel
- Refrigerant (½ lb, allowance)
- Any special order parts not listed above
Save $80.00 Off Second Complete System
(If second system is at the same address – Residential systems only)